fbpx

Handyman Service is essential to clean an air conditioner to maintain the excellent conditioner in your home. Filters inside air conditioners are created to catch dust and microbes, but if not cleaned routinely they can close up and collect condensation and even mould. Regularly vacuuming your air conditioner will also expect better energy power and lower running costs.

Air conditioners operate more efficiently when the evaporator and condenser coils or cooling fins are clean, and the fins are straight. keep your home fresh by cleaning a room air conditioner yourself.

Clean an Air Conditioner

Tools Required to Clean an Air Conditioner

  1. 4-in-1 screwdriver
  2. Fin Comb
  3. Leather gloves
  4. Rags
  5. Shop vacuum 

Materials Required to Clean an Air Conditioner 

  1. A/C coil cleaner
  2. Electric motor oil
  3. Household cleaner

Click on below Video: How to Clean a Window Air Conditioner

5 Simple Steps to Clean an Air Conditioner Unit

Step 1: The Cleaning Procedure

First, remove the plastic filter trim panel. It normally clasps off. Then remove it of the window or slide it outside the barrier. If you’re serving on a window A/C unit, remove the mounting block and the case. The case bolts are usually located along the bottom side. Remark the place of any odd-length bolts as they have to go back in the same points in reassembly.

Step 2: Comb out the Mats

When ordering the curved cooling fins with a fin comb. Pair the right end of the air conditioner fin comb to the fin spacing on your coils. Then enter the air conditioner fin comb and pull up to align the fins. Wrap leather gloves to block nasty injuries. Fin combs are available for most conventional air conditioners.

Step 3:  Clean out the Crud

Buy two cans of A/C unit coil cleanser. However, before using the filter, cleaning all noticeable buildup from both coils.

Step 4: Apply Foam Cleaner

Shoot the spray over the whole surface of both coils and let the foam do the task for you. If the accretion is massive, brush in the direction of the fins with a nylon-bristle brush.

Step 5: Service the Fan Motor

While the foam acts, clean the fan blades with a home cleaner and a cloth. If the fan motor has plastic or rubber-capped oiling harbours, pop them and squeeze in a few drops of electric motor oil and repeat. Finally, wash or repair the air filter and reinstall the system. It just might blow a lot cooler.

Some equipment is too costly to buy, so if you don’t want to purchase, then you can contact Skilliapp for professional Handyman service at your home to clean an air conditioner unit. If you have any questions about the cleaning a room air conditioner or anything concerning Handyman service, please contact us at 1833-475-4554 or via chat and hire the professional Handyman expert.

Leave a Reply

Top
[3167]
[3167]